RetroArms CNC Adjustable Nozzle (21-23 mm)

RetroArms Adjustable Nozzle 21-23 mm

RetroArms CNC adjustable nozzle makes it easy to find the correct nozzle length for a specific gearbox, hop-up chamber and magazine setup. The fine thread between the two parts allows the length to be adjusted within a range of 21-23 mm. For testing, it is recommended to secure the thread with a paint marker, which limits the nozzle from turning on its own during firing while still allowing further adjustment. Once the correct length has been determined, the nozzle can also be prepared for permanent use by securing the thread with threadlocker.

Key Features

Nozzle Adjustment and Securing

For testing, we recommend securing the adjusted length with a paint marker. This helps prevent unwanted nozzle rotation during firing while the connection can still be adjusted after the marker has dried. Once the correct length has been determined, the thread must be secured with threadlocker for permanent use. Always lubricate the sealing O-ring before using the nozzle. We recommend using the adjustable nozzle primarily to verify the ideal nozzle length for your setup and then purchasing the required length in a single-piece version.

Technical Specifications

• Type: Adjustable air nozzle
• Adjustment Range: 21-23 mm
• Construction: Two-piece, joined by a fine thread
• Material: EN AW 2007 duralumin
• Manufacturing: CNC turning
• Seal: O-ring, pre-installed from the factory

Package Contents

• 1× RetroArms adjustable nozzle (21-23 mm)